This is probably one of things that people mess up all the time. They both have to do with permissions on a file, but the SUID/GUID (or SETUID short for set-user-id/SETGID short for set-group-id) bit and the sticky-bit are 2 completely different things.

The SUID/GUID

The letters rwxXst select file mode bits for users:

• read (r)
• write (w)
• execute (or search for directories) (x)
• execute/search only if the file is a directory or already has execute permission for some user (X)
• set user or group ID on execution (s)
• restricted deletion flag or sticky bit (t)

The position that the x bit takes in rwxrwxrwx for the user octet (1st group of rwx) and the group octet (2nd group of rwx) can take an additional state where the x becomes an s. When this file when executed (if it's a program and not just a shell script), it will run with the permissions of the owner or the group of the file. That is called the SUID, when set for the user octet, and GUID, when set for the group octet.

So if the file is owned by root and the SUID bit is turned on, the program will run as root. Even if you execute it. The same thing applies to the GUID bit. You can set or clear the bits with symbolic modes like u+s and g-s, and you can set (but not clear) the bits with a numeric mode.

SUID/GUID examples

No SUID/GUID: Just the bits rwxr-xr-x are set:

# ls -lt test.pl -rwxr-xr-x 1 root root 179 Jan 9 01:01 test.pl

SUID and user's executable bit enabled (lowercase s): The bits rwsr-x-r-x are set.

# chmod u+s test.pl
# ls -lt test.pl
-rwsr-xr-x 1 root root 179 Jan  9 01:01 test.pl

SUID enabled and executable bit disabled (uppercase S): The bits rwSr-xr-x are set.

# chmod u-x test.pl
# ls -lt test.pl 
-rwSr-xr-x 1 root root 179 Jan  9 01:01 test.pl

GUID and group's executable bit enabled (lowercase s): The bits rwxr-sr-x are set.

# chmod g+s test.pl
# ls -lt test.pl 
-rwxr-sr-x 1 root root 179 Jan  9 01:01 test.pl

GUID enabled and executable bit disabled (uppercase S): The bits rwxr-Sr-x are set.

# chmod g-x test.pl
# ls -lt test.pl 
-rwxr-Sr-x 1 root root 179 Jan  9 01:01 test.pl

The sticky bit

The sticky bit on the other hand is denoted as a t, such as with the /tmp or /var/tmp directories:

# ls -ald /tmp
drwxrwxrwt 36 bin bin 8192 Nov 27 08:40 /tmp
# ls -ald /var/tmp
drwxrwxrwt  3 bin bin  256 Nov 27 08:28 /var/tmp

This bit should have always been called the "restricted deletion bit" given that's what it really denotes. When this mode bit is enabled, it makes a directory such that users can only delete files and directories within it that they are the owners of. For regular files the bit was used to save the program in swap device so that the program would load more quickly when run; this is called the sticky bit, but it's not used anymore in AIX.

More information can be found in the manual page of the chmod command or on http://en.wikipedia.org/wiki/Sticky_bit.

When you set up a new user account, and assign a password to that account, you'll want to make sure that it is a password that can not be easily guessed. Setting the initial password to something easy like "changeme", only allows hackers easy access to your system.

So the best way you can do this, is by generating a fully random password. That can easily be achieved by using the /dev/urandom device.

Here's an easy command to generate a random password:

# dd if=/dev/urandom bs=16 count=1 2>/dev/null | openssl base64 | sed "s/[=O/\]//g" | cut -b1-8

This will create passwords like:

ej9yTaaD
Ux9FYusx
QR0TSAZC
...

Security guidelines nowadays can be annoying. Within many companies people have to comply with strict security in regards to password expiration settings, password complexity and system security settings. All these settings and regulations more than often result in people getting locked out from their accounts on AIX systems, and also getting frustrated at the same time.

To help your users, you can't go change default security settings on the AIX systems. Your auditor will make sure you won't do that. But instead, there are some "tricks" you can use, to ensure that a user account is (and stays) available to your end user. We've put all those tricks together in one simple script, that can fix a user account, and we called it fixuser.ksh. It will fix 99% of all user related login issues.

You can run this script as often as you like and for any user that you like. It will help you to ensure that a user account is not locked, that AIX won't bug the user to change their password, that the user doesn't have a failed login count (from typing too many passwords), and a bunch of other stuff that usually will keep your users from logging in and getting pesky "Access Denied" messages.

The script will not alter any default security settings, and it can easily be adjusted to run for several user accounts, or can be run from a crontab so user accounts stay enabled for your users. The script is a win-win situation for everyone: Your auditor is happy, because security settings are strict on your system; Your users are happy for being able to just login without any hassle; And the sys admin will be happy for not having to resolve login issues manually anymore.

The script can be run by entering a specific user account:

# fixuser.ksh username

The script:

#!/usr/bin/ksh

fixit()
{

  myid=${1}

  # Unlock account
  printf "Unlocking account for ${user}..."
  chuser account_locked=false ${user}
  echo " Done."

  # Reset failed login count
  printf "Reset failed login count for ${user}..."
  chuser unsuccessful_login_count=0 ${user}
  echo " Done."

  # Reset expiration date
  printf "Reset expiration date for ${user}..."
  chuser expires=0 ${user}
  echo " Done."

  # Allow the user to login
  printf "Enable login for ${user}..."
  chuser login=true ${user}
  echo " Done."

  # Allow the user to login remotely
  printf "Enable remote login for ${user}..."
  chuser rlogin=true ${user}
  echo " Done."

  # Reset maxage
  printf "Reset the maxage for ${user}..."
  m=`lssec -f /etc/security/user -s default -a maxage | cut -f2 -d=`
  chuser maxage=${m} ${user}
  echo " Done."

  # Clear password change requirement
  printf "Clear password change requirement for ${user}..."
  pwdadm -c ${user}
  echo " Done."

  # Reset password last update
  printf "Reset the password last update for ${user}..."
  let sinceepoch=`perl -e 'printf(time)' | awk '{print $1}'`
  n=`lssec -f /etc/security/user -s default -a minage | cut -f2 -d=`
  let myminsecs="${n}*7*24*60*60"
  let myminsecs="${myminsecs}+1000"
  let newdate="${sinceepoch}-${myminsecs}"
  chsec -f /etc/security/passwd -s ${user} -a lastupdate=${newdate}
  echo " Done."
}

unset user

if [ ! -z "${1}" ] ; then
  user=${1}
fi

# If a username is provided, fix that user account

unset myid
myid=`id ${user} 2>/dev/null`
if [ ! -z "${myid}" ] ; then
  echo "Fixing account ${user}..."
  fixit ${user}
  printf "Remove password history..."
  cp /dev/null /etc/security/pwdhist.pag 2>/dev/null
  cp /dev/null /etc/security/pwdhist.dir 2>/dev/null
  echo " Done."
else
  echo "User ${user} does not exist."
fi

Sometimes when password rules are very strict, a user may have problems creating a new password that is both easy to remember, and still adheres to the password rules. To aid the user, it could be useful to clear the password history for his or her account, so he or she can re-use a certain password that has been used in the past. The password history is stored in /etc/security/pwdhist.pag and /etc/security/pwdhist.dir. The command you can use to disable the password history for a user is:

# chuser histsize=0 username

Actually, this command does not the password history in /etc/security/pwdhist.dir and /etc/security/pwdhist.pag, but only changes the setting of histsize for the account to zero, meaning, that a user is not checked again on re-using old passwords. After the user has changed his or her password, you may want to set it back again to the default value:

# grep -p ^default /etc/security/user | grep histsize
        histsize = 20
# chuser histsize=20 username

In older AIX levels, this functionality (to use chuser histsize=0) would actually have cleared out the password history of the user. In later AIX levels, this functionality has vanished.

So, if you truely wish to delete the password history for a user, here's another way to clear the password history on a system: It is accomplished by zeroing out the pwdhist.pag and pwdhist.dir files. However, this results in the deletion of all password history for all users on the system:

# cp /dev/null /etc/security/pwdhist.pag
# cp /dev/null /etc/security/pwdhist.dir

Please note that his is a temporary measure. Once these files are zeroed out, as soon as a user changes his or her password again, the old password is stored again in these files and it can't be reused (unless the histsize attribute for a user is set to 0).

Usually, with the default settings used with NMON, along with using PuTTY on a Windows system, you may notice that the boxes and lines in NMON are not displayed correctly. It may look something like this:



An easy fix for this issue is to change the character set translation within PuTTY. In the upper left corner of your PuTTY window, click the icon and select "Change Settings". Then navigate to Window -> Translation. In the "Remote character set" field, change "UTF-8" to "ISO-8859-1".



Once changed, restart PuTTY and it should something like this:



Another option is to stop using boxes and lines altogether. You can do this by starting nmon with the -B option:

# nmon -B

Or you can set the NMON environment variable to the same:

# export NMON=B
# nmon

OpenSSL on AIX can be impacted by the Heartbleed bug. Only OpenSSL 1.0.1e (IBM AIX VRMFs - 1.0.1.500 & 1.0.1.501) is vulnerable to the Heartbleed bug (CVE-2014-010). All OpenSSL v0.9.8.xxxx and v12.9.8.xxxx are NOT vulnerable to this CVE.

IBM released OpenSSL 1.0.1g by the end of April 2014, which is the official fix.

The following is information about an ifix that was made available by IBM. The ifix is just a workaround, and currently IBM recommends upgrading to OpenSSL 1.0.1.511 instead (see below).

• This is a workaround compiled with the feature turned off.
• This is not OS dependent. It only depends on the OpenSSL level.

Below are the download and install/uninstall instructions.

The OpenSSL ifix doesn't require a reboot. However... It's a shared library update, so any daemons that use it will need to be restarted such as sshd. If you aren't sure what applications running on your machine use OpenSSL, it's recommended to reboot.

To download it, go to: https://testcase.software.ibm.com/ and log in as "Anonymous" (no password needed). Click on the "fromibm" folder, and then click on the "aix" folder. Scroll down the list until you find the following file and click on it to download:

0160_ifix.140409.epkg.Z

Once the download is complete, transfer the file to your AIX system. Log on to your AIX system, go to the directory where you put the file, and run the following command as the root user.

To preview the installation of 0160_ifix.140409.epkg.Z, please do the following:

# emgr -p -e 0160_ifix.140409.epkg.Z

To install the ifix, run the following:

# emgr -X -e 0160_ifix.140409.epkg.Z

If you need to uninstall the iFix for some reason, run the following command as root:

# emgr -r -L 0160_ifix.140409.epkg.Z

The following is more information, updated on June 13, 2014:

IBM has released several new levels for OpenSSL that address both the Heartbleed bug, as well as several other security vulnerabilities that have been identified recently.

We currently recommend downloading OpenSSL 1.0.1.511. This level can be used on AIX 5.3, 6.1 and 7.1. You can find OpenSSL in the IBM Web Download Pack at:

http://www-03.ibm.com/systems/power/software/aix/expansionpack/

Click on Downloads (on the right), log in with your IBM user ID (or register for one, if you don't already have an IBM user ID). Select openssl on the next page, and click on Continue at the bottom. Click Submit to accept IBM's privacy statement on the next page, and you'll be forwarded to a list of possible downloads. Here, click on "Download using http", and select the OpenSSL images for openssl-1.0.1.511.tar.Z. You probably also want to review the Readme beneath it as well.

You will download the openssl-1.0.1.511.tar.Z file. Transfer that onto your AIX systems into a separate folder.

Uncompress the file:

# gzip -d openssl-1.0.1.511.tar.Z

Now you will have a tar file.

Un-tar it:

# tar xf openssl-1.0.1.511.tar

That will give you folder openssl-1.0.1.511 within your current folder. Go into that folder:

# cd openssl-1.0.1.511

Here you can find 3 filesets; run inutoc to generate the .toc file:

# ls
openssl.base       openssl.license    openssl.man.en_US
# inutoc .

Then install the filesets:

# update_all -d . -cY

Now, it should be installed. Before logging out, make sure you can access your system through ssh using a separate window.

For more information, see http://heartbleed.com. Please ensure your UNIX Health Check level is up to date. Version 14.04.10 and up includes a check for your AIX systems to see if any are impacted by the Heartbleed bug.

The chrctcp command in not documented in AIX, but you can still use it to do nice things, especially when you are scripting. Some examples are:

To enable xntpd in /etc/rc.tcpip, and to start xntpd:

# chrctcp -S -a xntpd

To disable xntpd in /etc/rc.tcpip, and to stop xntpd:

# chrctcp -S -d xntpd

To enable xntpd in /etc/rc.tcpip, but not start xntpd:

# chrctcp -a xntpd

To disable xntpd in /etc/rc.tcpip, but to not stop xntpd:

# chrctcp -d xntpd

So, instead of manually editing /etc/rc.tcpip, you can use chrctcp to enable (uncomment), disable (comment) some services, and start and stop them in a single command.

As an AIX admin, you may not always know what switches a certain server is connected to. If you have Cisco switches, here's an interesting method to identify the switch your server is connected to.

First, run ifconfig to look up the interfaces that are in use:

# ifconfig -a | grep en | grep UP | cut -f1 -d:
en0
en4
en8

Okay, so on this system, you have interfaces en0, en4 and en8 active. So, if you want to determine the switch en4 is connected to, run this command:

# tcpdump -nn -v -i en4 -s 1500 -c 1 'ether[20:2] == 0x2000'
tcpdump: listening on en4, link-type 1, capture size 1500 bytes

After a while, it will display the following information:

11:40:14.176810 CDP v2, ttl: 180s, checksum: 692 (unverified)
   Device-ID (0x01), length: 22 bytes: 'switch1.host.com'
   Version String (0x05), length: 263 bytes:
   Cisco IOS Software, Catalyst 4500 L3 Switch Software 
      (cat4500e-IPBASEK9-M), Version 12.2(52)XO, RELEASE SOFTWARE
   Technical Support: http://www.cisco.com/techsupport
   Copyright (c) 1986-2009 by Cisco Systems, Inc.
   Compiled Sun 17-May-09 18:51 by prod_rel_team
   Platform (0x06), length: 16 bytes: 'cisco WS-C4506-E'
   Address (0x02), length: 13 bytes: IPv4 (1) 111.22.33.44
   Port-ID (0x03), length: 18 bytes: 'GigabitEthernet2/7'
   Capability (0x04), length: 4 bytes: (0x00000029): 
      Router, L2 Switch, IGMP snooping
   VTP Management Domain (0x09), length: 2 bytes: ''''
   Native VLAN ID (0x0a), length: 2 bytes: 970
   Duplex (0x0b), length: 1 byte: full
   Management Addresses (0x16), length: 13 bytes: IPv4 (1) 
      111.22.33.44
   unknown field type (0x1a), length: 12 bytes:
      0x0000:  0000 0001 0000 0000 ffff ffff
47 packets received by filter
0 packets dropped by kernel

Note here that this will only work on Cisco switches, as it uses the Cisco Discovery Protocol (CDP).

The output above will help you determine, that en4 is connected to a network switch called 'switch1.host.com', with IP address '111.22.33.44', and that it is connected to port 'GigabitEthernet2/7' (most likely port 7 on blade 2 of this switch).

If you're running the same command on an Etherchannelled interface, keep in mind that it will only display the information of the active interface in the Etherchannel configuration. You may have to fail over the Etherchannel to a backup adapter, to determine the switch information for the backup adapter in the Etherchannel configuration.

If your LPAR has virtual Ethernet adapters, this will not work (the command will just hang). Instead, run the command on the VIOS instead.

Also note that you may need to run the command a couple of times, for tcpdump to discover the necessary information.

Another interesting way to use tcpdump is to discover what VLAN an network interface is connected to. For example, if you have 2 interfaces on an AIX system, and you would want to configure them in an Etherchannel, or you would want to use one of them as a production interface, and another as a standby interface. In that case, it is important to know that both interfaces are within the same VLAN. Obviously, you can ask your network team to validate, but it is also good to be able to validate on the host side. Also, you can just configure an IP address on it, and see if it will work. But for production systems, that may not always be possible.

The trick basically is, to run tcpdump on an interface, and check what network traffic can be discovered. For example, if you have 2 network interfaces, like these:

# netstat -ni | grep en[0,1]
en0 1500 link#2    0.21.5e.c0.d0.12 1426632806  0 86513680  0  0
en0 1500 10.27.18  10.27.18.64      1426632806  0 86513680  0  0
en1 1500 link#3    0.21.5e.c0.d0.13   20198022  0  7426576  0  0
en1 1500 10.27.130 10.27.130.10       20198022  0  7426576  0  0

In this case, interface en0 uses IP address 10.27.18.64, and is within the 10.27.18.x subnet. Interface en1 uses IP address 10.27.130.10, and is within the 10.27.130.x subnet (assuming both interfaces use a subnet mask of 255.255.255.0).

Now, if en0 is a production interface, and you would like to confirm that en1, the standby interface, can be used to fail over the production interface to, then you need to know that both of the interfaces are within the same VLAN. To determine that, for en1, run tcpdump, and check if any network traffic in the 10.27.18 subnet (used by en0) can be seen (press CTRL-C after seeing any such network traffic, to cancel the tcpdump command):

# tcpdump -i en1 -qn net 10.27.18
tcpdump: verbose output suppressed, 
use -v or -vv for full protocol decode
listening on en1, link-type 1, capture size 96 bytes
07:27:25.842887 ARP, Request who-has 10.27.18.136
   (ff:ff:ff:ff:ff:ff) tell 10.27.18.2, length 46
07:27:25.846134 ARP, Request who-has 10.27.18.135 
   (ff:ff:ff:ff:ff:ff) tell 10.27.18.2, length 46
07:27:25.917068 IP 10.27.18.2.1985 > 224.0.0.2.1985: UDP, length 20
07:27:25.931376 IP 10.27.18.3.1985 > 224.0.0.2.1985: UDP, length 20
^C
24 packets received by filter
0 packets dropped by kernel

After seeing this, you know for sure that on interface en1, even though it has an IP address in subnet 10.27.130.x, network traffic for 10.27.18.x subnet can be seen, and thus that failing over the production interface IP address from en0 to en1 should work just fine.

You will encounter them from time to time: files with weird filenames, such as spaces, escape codes, or uncommon characters. These often can be very difficult to remove.

For example, files with a space at the end:

# touch "a file "
# ls
a file

It's not such a problem, if you created the file yourself, and you KNOW there is space at the end. Otherwise, it can be quite difficult to remove it:

# rm "a file"
rm: a file: A file or directory in the path name does not exist.

It can be even more ugly if there is a ^M in the file name:

# touch 'a^Mfile'
# ls a*
a
file
# ls file
ls: 0653-341 The file file does not exist.

And it will quickly become horrible if there are unprintable characters in file names, or a combination of all of the above. Or how about a file called "-rf /". Would do dare run the command: "rm -rf /" on your system, not knowing if this will wipe out all files, or just remove the file with the filename "-rf /"?

So, if you have a file with an awkward filename, or simply don't know the file name of a file, because it contains unprintable characters, escape codes, slashes, spaces or tabs, how do you safely remove it?

Well, you can remove files by inode. First, discover the inode of a file:

# ls -alsi
12294  0 -rw-r--r--  1 root  system  0 May 07 15:38 a file

In the example above, the inode has number 12294. Then simply remove it using the find command, and the -exec option for the find command:

# find . -inum 12294 -ls
12294  0 -rw-r--r--  1 root  system  0 May  7 15:38 ./a file
# find . -inum 12294 -exec rm {} \;

A core dump is the process by which the current state of a program is preserved in a file before a program is ended because of an unexpected error.

Core dumps are usually associated with programs that have encountered an unexpected, system-detected fault, such as a segmentation fault or a severe user error. An application programmer can use the core dump to diagnose and correct the problem. The core files are binary files that are specific to the AIX operating system.

To generate a core file of a running program, you can use the gencore command. Before you do so, make sure that the system is set to allow applications to generate full core files. By default this will be disabled, to avoid applications quickly filling up file systems.

# lsattr -E -l sys0 -a fullcore
fullcore false Enable full CORE dump True
# chdev -l sys0 -a fullcore=true
sys0 changed

Also check your umlimts, to ensure that the user is set to allow large files to be generated. And check the available space in the file system where you want to write the core file.

Next, generate the core file of a running program, for example of a process with ID 65274068. Note that the gencore command creates a core file without terminating the process.

# gencore 65274068 /tmp/core_65274068

Once the core file has been generated, be sure to set fullcore back to false:

# chdev -l sys0 -a fullcore=false
sys0 changed
# lsattr -E -l sys0 -a fullcore
fullcore false Enable full CORE dump True

Now you can use the snapcore command to gather the core file, the program, and any libraries used by the program into one pax archive, which can be sent to a vendor for further analysis. Using the -d option of the snapcore command you specify where the archive will be written.

# file core_65274068
core_65274068: AIX core file fulldump 64-bit, user
# snapcore -d /tmp core_65274068 /path/to/the/program

Core file "core_65274068" created by "user"

pass1() in progress ....
                Calculating space required .
                Total space required is 4605936 kbytes ..
                Checking for available space ...
                Available space is 33787748 kbytes
pass1 complete.

pass2() in progress ....
                Collecting fileset information .
                Collecting error report of CORE_DUMP errors ..
                Creating readme file ..
                Creating archive file ...
                Compressing archive file ....
pass2 completed.

Snapcore completed successfully. Archive created in /tmp.

Check the file:

# ls -l 
-rw-rw-rw- 1 root system 12183573 Mar 22 08:50 core_65274068 
-rw-r--r-- 1 root system 12594032 Mar 22 08:50 snapcore_663646.pax.Z 
# file snapcore_663646.pax.Z 
snapcore_663646.pax.Z: compressed data block compressed 16 bit 

The resulting snapcore file can then be sent to Technical Support. It can then be uncompressed and untarred (tar can work on pax images).